How to

How To Install A Two Handle Kitchen Faucet? [Detailed Steps Guide]

Both new and seasoned homeowners alike favor the two handle kitchen faucet. High levels of convenience are provided, including simple access to water. A two handle kitchen faucet, however, offers much more than just an easy access to water.

How to install a two handle kitchen faucet? Well, no worries—you’re at the right spot! A step-by-step instruction manual for installing a two handle kitchen faucet has been created.

How To Install A Two Handle Kitchen Faucet

Essential Equipment

  • Adjustable Wrench
  • Basin Wrench
  • Flashlight
  • Plastic pan
  • Pliers
  • Safety glasses or goggles
  • Screwdriver

Required Materials

  • Two-Handle Faucet to install
  • Pipe putty
  • Towel or rags
  • Faucet supply lines
  • All-purpose cleaner

How To Install A Two Handle Kitchen Faucet

What do you do?

Step 1: Set up your work area

Remove any items or accessories that are kept there from beneath your sink. Make sure to turn off the power before you start if your sink has an electrical outlet. Prepare a pan, a flashlight, and some rags or towels in case there is a water leak. To protect your eyes from anything that might fall or drop from above, PPE safety glasses are a need.

Step 2: Close the water supply valves

You must shut off the water to your home if there are no supply valves under the sink. If there are valves, close them by rotating them counterclockwise. Use pliers if they are difficult to turn. Open the faucets after shutting off the water supply to release any leftover line pressure.

Retain the water supply valves closed.

Step 3: Disconnect the water supply lines.

You must take apart the old two-handle faucet set in order to install the new one. The water supply lines beneath the sink should be shut off. A nut will be used to secure each of the separate supply lines for hot and cold water to its respective valve. Using a wrench, take these nuts off. If a valve drips or leaks when the water supply is shut off, the valve is broken. Replace the valve and turn off the water supply to the entire house.

Step 4: Take apart the connections to the faucets

To remove the faucet, you must cut the supply lines that are attached to your old faucet. The two hot and cold valves will be directly connected to water supply pipes. It is necessary to unscrew and separate these supply line connectors. The old mounting must now be removed.

Step 5: Remove the old faucet

On the underside of your sink, the previous faucet will be fastened with some sort of mounting hardware. The hot and cold valve bodies typically have mounting hardware. It is necessary to take out all of the mounting hardware and fasteners. Apply oil to loosen rusty or challenging screws or nuts and give it time to absorb before continuing. If necessary, repeat.

Your old faucet should be simple to remove from your sink once all mounting accessories have been taken out. You must break any caulking if you have any. Clean the sink or countertop area thoroughly after removing the old faucet.

Step 6: Installing after Old Faucet Removal

Read the installation manual from the manufacturer. To prevent leaks when installing the faucet, place a rubber gasket or deck plate over the underside of the faucet and place a dab of pipe putty between the countertop and the faucet that is 1/4 inch thick. The instructions will make note of this.

Step 7: Set the hot/cold components and the faucet in place.

If your faucet already has riser tubes attached, you can lower it into place by inserting them straight into the holes in your sink or countertop.

Step 8: Tighten the mounting hardware

Tighten the bolts holding your faucet unit in place underneath your sink. Some faucets will have nuts and washers that screw onto the valve components, while others will have brackets that are fastened with bolts.

Step 9: Screw the Hot and Cold Valves in place

You must join the flexible hot and cold water supply lines to the faucet spout underneath your sink.

Put the Hot and Cold Valves in place.

Step 10: Reattach the water supply

Connect the water supply lines to the hot and cold valves’ riser tubes. Now, turn on the water supply valves that are located underneath your sink, or, if you don’t have any valves, turn on the water supply for your entire home, and check for any leaks.

Step 11: Pipe flushing

To clear any residual debris from your pipes, unscrew the aerator head from the faucet spout and flow the water while doing so.

Step 12: The Task Is Complete

If there is no visible leak beneath your sink and water is flowing from the faucet, replace the aerator head on the faucet. Your brand-new two-handle faucet is now operational.

How To Install A Two Handle Kitchen Faucet

When to Contact a Plumber

If there are any surprises along the way, what should be a 2-hour faucet replacement task can easily grow into a weekend plumbing project. It’s frequently preferable to call a plumber rather than try to remove and reinstall additional plumbing components if you don’t have any plumbing experience or run into a problem.

  • There is a faucet set on the wall. A wall-mount faucet with an extending and rotating faucet arm is one of the newest and trendiest faucets available today. It appeals to people who want Old World appeal as well as those who want to establish a semi-professional chef’s kitchen. This is regrettably one of the trickiest replacements a homeowner may try. A plumber should be hired to install new water supply lines and open up the wall behind the sink in order to convert from a sink-mounted (or countertop-mounted) faucet to a wall-mounted faucet. Additionally, they will need to replace your sink or countertop in order to remove the faucet holes that were left behind.
  • To access the old faucet, extra plumbing must be removed. There are times when you just can’t get your body deep enough under the sink to create a path that will allow you to reach the nuts holding the old faucet in place. It might quickly start to get more difficult when it appears that you will need to remove additional plumbing, such as the sink drain trap or the garbage disposal. A qualified plumber can assist.
  • There isn’t enough time for you to finish the project. It might be a good idea to call a plumber for assistance if you don’t have much experience with plumbing or don’t have the extra time to learn how.
  • You put in the new faucet, but you don’t know why it’s leaking. It’s time to look into and address the problem if you installed the new faucet correctly but discovered a leak when you tested it. It’s usually better to get assistance from a qualified plumber if you’ve checked all of the connections and are still unable to resolve the issue. Over time, a small leak can do a lot of harm.

Final Thoughts

One of the simpler kitchen renovation tasks that do-it-yourself homeowners may complete to upgrade their homes is learning how to replace a kitchen faucet. Even if it only takes a few hours to install a new faucet, the kind of faucet that needs to be changed will determine how much time, what equipment are required, and whether or not professional assistance is best. See more information in website Wsulawreview.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button